"Your chips are beautifully baked, so you also need good accessories"

MBE.4.4.2

Syringe to Tubing

MBE.4.1 Syringe to Tubing

Suitable for regular syringes with 4mm tips and flexible tubings with ID smaller than 1,5mm.

Please, tell us for other syringes and tubings that you use and we do fitting of your need.

Total height is 6mm and width is 14mm.

MBE.2.1.2

Tubing to Chip

MBE2R1.1 / MBE2R1.2 Tubing to Chip

Suitable for regular flexible tubings with ID smaller than 1.5 mm and 2.0 mm.

The inlet of microfluidics should be max 1.5 mm or max 2.0 mm.

Please, tell us for tubings that you use and we do fitting of your need.

Total height is 6mm and the length of part inside chip is 2mm.

 

MBE.2.2.2

Two seperate Tubings to Chip

MBE2R2.1 / MBE2R2.2 Double Tubing to Chip

Suitable for 2 regular flexible tubings at the same time with ID smaller than 1.5 mm and 2.0 mm.

The inlet of microfluidics should be max 1.5 mm or max 2.0 mm.

Please, tell us for tubings that you use and we do fitting of your need.

Total height is 6mm and the length of part inside chip is 2mm.

MBE.V

Valve

MBE.V.1 Manual Valve

Suitable for regular flexible tubings with OD smaller between 3.0 mm and 1.0 mm.

The flow can be on/off with just one push.

Ready to use on optical table and can be modified for adjusting on any experimental set-up.

Total height is 14 mm and the width is 28 mm.

 

 

MBE.1.2

Tubing to Two seperate Tubing (T-Connect)

MBE.1R1.1 Tubing to Tubing

Suitable for regular flexible tubings with ID smaller than 1.5 mm and 2.0 mm.

Please, tell us for tubings that you use and we do fitting of your need.

Total height is 10 mm to 8 mm.

 

MBE.1.1

Tubing to Tubing

MBE.1R2.1 Tubing to Tubing

Suitable for regular flexible tubings with ID smaller than 1.5 mm and 2.0 mm. This is a version of T-junction.

Please, tell us for tubings that you use and we do fitting of your need.

Total height is 10 mm to 8 mm.

 

Application Example

Surface Plasmon Resonance (SPR) Assay Flow

Application Example: Surface Plasmon Resonance (SPR) Assay Flow

In this example there is one inlet to the SPR chip and 2 or 4 different solutions of analyte, ligand, and buffers are pumped by a syringe pump.

In order to enable the flow of single solution at a time, one valve is added following each syring and tubing-to-tubing and tubing-to-chip fittings are used accordingly.

The user just changes the position of syringe on syringe pump for the flow of relevant solution.